安装vscode Web版本

最简单的docker

```bash
mkdir /usr/vs.config
mkdir /usr/project

docker run -itd --name codeserver -p 8080:8080 \
  -p 9000-9100:9000-9100 \
  -v "/usr/vs.config:/home/coder/.config" \
  -v "/usr/project:/home/coder/project" \
  -u "$(id -u):$(id -g)" \
  -e "DOCKER_USER=$USER" \
  -e PASSWORD=123456 \
  --privileged \
  mbaisha/code-server:latest
```

```bash
docker exec -it codeserver  echo fs.inotify.max_user_watches = 524288 | sudo tee -a /etc/sysctl.conf 
docker exec -it codeserver sudo sysctl -p
```

```
docker run -it --name codeserver -p 706:8080 \
  -v "/data/vscode/.local:/root/.local" \
  -v "/data/vscode/.config:/root/.config" \
  -v "/data/vscode/src:/home/coder/project" \
  -v "/opt/dotnet:/dotnet" \
  -u "$(id -u):$(id -g)" \
  -e "DOCKER_USER=$USER" \
  codercom/code-server:latest

#进容器

sudo cp /etc/apt/sources.list /etc/apt/sources.list.bak
sudo sed -i 's/archive.ubuntu.com/mirrors.aliyun.com/g' /etc/apt/sources.list
sudo sed -i 's/archive.ubuntu.com/mirrors.aliyun.com/g' /etc/apt/sources.list
sudo sed -i 's/security.ubuntu.com/mirrors.aliyun.com/g' /etc/apt/sources.list

sed -i "s@http://deb.debian.org@https://mirrors.163.com@g" /etc/apt/sources.list
sed -i 's/security-cdn.debian.org/mirrors.aliyun.com' /etc/apt/sources.list
```

codercom/code-server

```bash
docker pull codercom/code-server
mkdir -p ~/vs.config
docker run -it --name code-server -p 127.0.0.1:8080:8080 \
  -v "$HOME/vs.config:/home/coder/.config" \
  -v "$PWD:/home/coder/project" \
  -u "$(id -u):$(id -g)" \
  -e "DOCKER_USER=$USER" \
  -e PASSWORD=123456 \
  codercom/code-server:latest
```

接下去安装node()
```bash
wget https://nodejs.org/dist/v16.17.0/node-v16.17.0-linux-x64.tar.gz
tar -xf node-v16.17.0-linux-x64.tar.gz
docker cp node-v16.17.0-linux-x64  dockerId: /usr/local/node-v16.17.0
```
设置环境变量
```bash
docker cp dockerId:/etc/bash.bashrc  $PWD
#write
export NODE_HOME=/usr/local/node-v16.17.0
export PATH=$NODE_HOME/bin:$PATH
```
```bash
npm config set registry http://registry.npm.taobao.org/
npm install yarn -g
yarn config set registry https://registry.npm.taobao.org -g
yarn config set sass_binary_site http://cdn.npm.taobao.org/dist/node-sass -g
```

```bash
rm -rf node_modules
rm yarn.lock
yarn install -std=c++17
```

```bash
curl -fsSL https://code-server.dev/install.sh | sh，
```
完成后修改~/.config/code-server/config.yaml，
再运行code-server命令，就可以开始在线写代码了。
为了安全，该用export PASSWORD="xxx"来配密码。

host
199.232.28.133 raw.githubusercontent.com

nginx 代理

```bash
map $http_upgrade $connection_upgrade {
    default upgrade;
    ''      close;
}
server
{
    listen 80;
    server_name vscode.com;
    #ERROR-PAGE-START  错误页配置，可以注释、删除或修改
    #error_page 404 /404.html;
    #error_page 502 /502.html;
    #ERROR-PAGE-END

#PROXY-START
    location / {
        proxy_http_version 1.1;
        proxy_set_header X-Real-IP $remote_addr;
        proxy_set_header X-Real-PORT $remote_port;
        proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
        proxy_set_header Host $http_host;
        proxy_set_header Scheme $scheme;
        proxy_set_header Server-Protocol $server_protocol;
        proxy_set_header Server-Name $server_name;
        proxy_set_header Server-Addr $server_addr;
        proxy_set_header Server-Port $server_port;
        proxy_set_header Upgrade $http_upgrade;
        proxy_set_header Connection $connection_upgrade;
        add_header Cache-Control no-store;
        proxy_pass http://127.0.0.1:5572/;
    }
    #PROXY-END

#禁止访问的文件或目录
    location ~ ^/(\.user.ini|\.htaccess|\.git|\.svn|\.project|LICENSE|README.md)
    {
        return 404;
    }

#access_log  /www/wwwlogs/127.0.0.1.log;
    #error_log  /www/wwwlogs/127.0.0.1.error.log;
}

```

------------
以下内容在gitee同步

github加速：
https://ghproxy.com/

------------

最低要求（官方） 启用了 WebSockets、1 GB RAM 和 2 个 vCPU 的 Linux 机器

有四种方法可以开始：

1. 使用[安装脚本](https://gitee.com/link?target=https%3A%2F%2Fgithub.com%2Fcoder%2Fcode-server%2Fblob%2Fmain%2Finstall.sh)，它可以自动执行大部分过程。如果可能，该脚本会使用系统包管理器。
2. [手动安装代码服务器](https://gitee.com/link?target=https%3A%2F%2Fcoder.com%2Fdocs%2Fcode-server%2Flatest%2Finstall)
3. 使用[coder/coder](https://gitee.com/link?target=https%3A%2F%2Fcdr.co%2Fcoder-github)将代码服务器部署到您的团队
4. 使用我们的一键式按钮和指南将代码服务器部署到云提供商

如果您使用安装脚本，您可以预览安装过程中发生的情况：

```
curl -fsSL https://code-server.dev/install.sh | sh -s -- --dry-run
```

要安装，请运行：

```
curl -fsSL https://code-server.dev/install.sh | sh
```

完成后，安装脚本会打印出运行和启动代码服务器的说明。

你也可以使用Docker部署，我修改过的版本 添加了 -nodejs v16.17.0 -npm v8.15.0 -yarn v1.22.19

```
docker pull mbaisha/code-server
mkdir -p ~/.config
docker run -itd --name code-server -p 8080:8080 \
  -v "$HOME/.config:/home/coder/.config" \
  -v "$PWD:/home/coder/project" \
  -u "$(id -u):$(id -g)" \
  -e "DOCKER_USER=$USER" \
  -e PASSWORD=2022 \
  --privileged \
  mbaisha/code-server:latest
```

端口在8080 密码2022 你也可以预留9000-9100端口 添加 -p 9000-9100:9000-9100 \

或者使用codercom原版 [https://hub.docker.com/r/codercom/code-server](https://hub.docker.com/r/codercom/code-server)

```
docker pull codercom/code-server
mkdir -p ~/.config
docker run -it --name code-server -p 127.0.0.1:8080:8080 \
  -v "$HOME/.config:/home/coder/.config" \
  -v "$PWD:/home/coder/project" \
  -u "$(id -u):$(id -g)" \
  -e "DOCKER_USER=$USER" \
  codercom/code-server:latest
```

更方便：
https://github.com/coder/code-server/releases
下载rpm包进行安装
可以使用
https://gh.api.99988866.xyz/
https://ghproxy.com/
进行下载加速

sudo yum localinstall code-server*.rpm

sudo systemctl enable code-server@$USER
sudo vim ~/.config/code-server/config.yaml

bind-addr:后跟着coder-server绑定的ip:端口号，注意默认是8080，可能会和tomcat冲突，自行修改
password:设置密码
*重启code-server
sudo systemctl restart code-server@$USER
防火墙开放端口
firewall-cmd --zone=public --add-port=8080/tcp --permanent

安装git
```bash
wget https://mirrors.edge.kernel.org/pub/software/scm/git/git-2.9.5.tar.gz
tar -zxvf git-2.*.tar.gz
yum install -y curl-devel expat-devel gettext-devel openssl-devel zlib-devel
yum install -y gcc perl-ExtUtils-MakeMaker
# 切换到git目录
cd git-2.9.5
创建要安装的目录
mkdir -p  /usr/local/git
编译安装
make prefix=/usr/local/git all
make prefix=/usr/local/git install
# 添加环境变量
#vim /etc/profile
VIM  /etc/bashrc
#添加以下配置
export PATH=$PATH:/usr/local/git/bin
source /etc/bashrc
ln -s /usr/local/git/bin/git /usr/bin/git
git --version
```

安装vscode Web版本

添加新评论

关于博主

文章分类

最受欢迎的文章

最近回复

其它